{{selectedAlertBand.alertDescription}}
{{selectedAlertBand.incident.heading}}
{{alert.alertDescription}}
{{index+1}}
/ {{ alertBandDate.length}}
{{selectedAlertBand.alertDescription}}
{{selectedAlertBand.alertDescription}}
{{selectedAlertBand.alertLinkText}} {{selectedAlertBand.alertLinkText}}
For further updates subscribe
We’re investing £2.7million to provide properties in Morley St Botolph with mains sewerage for the first time.
The purpose of this project is to prevent pollution of the local environment caused by poor performing private drainage systems. Sewer systems usually work using gravity, however, as the village is very flat and large, this would require the installation of multiple pumping stations. The new sewerage system will work using vacuum pressure.
New underground vacuum pots will collect flows from properties, this will then be released into new sewer pipes in the road. After this the new flows will travel down the new sewer to a new vacuum station then away to be treated.
Thank you to those who attended our webinar. If you missed it or would like to look back, you can watch it here:
25 November 2021 Morley St Botolph webinar
Facts and frequently asked questions
Why are you doing this project?
In June 2016 we received an application in from the Parish Council on behalf of multiple properties in the area. We carried out various tests which proved that the current drainage systems in the village were having a detrimental impact on the local environment.
Therefore, under Section 101a of the Water Industry Act, we accepted a statutory duty for the provision of a first time sewerage scheme for Morley St Botolph to resolve environmental and amenity problems.
What do I need to do to connect to the public sewer?
We will invite you to a one to one meeting with us to discuss your connection point, after you have consulted with us, you should make your own arrangements to find and employ a drainage contractor or local builder to make the connection. You will need to apply for Building Regulation approval which should be done through your local council before you start any work.
What can I connect and discharge into the new sewer?
You can only connect your foul water system to the new sewer. This includes all the used water from your kitchen, bathroom and toilet. It doesn’t include the disposal of any surface water, water from roofs or swimming pools.
What sewerage charges will I pay?
Most properties will be charged on our standard tariff – you can find the current years charges on our website anglianwater.co.uk/charges.
When can my property be connected?
You can connect to the new sewer once the whole project is completed. As soon as the sewer is ready, we’ll write to you to say the sewer is available, and ready to connect to.
Who carries out the work within my property?
You (the property owner) are responsible for arranging and paying for all work within your property boundary. Building Regulations approval will have to be sought from your local council. They should be able to provide any help or advice you might need.
Why do I need Building Regulations approval?
Private property drainage is required to comply with the conditions of Part H1 of the Building Regulations 2010. This requirement is managed by the Building Control Section of your local council.
Do I have to connect to the new sewer?
No, we can’t insist that you connect to the new sewer if you don’t want to. Although if you do choose to connect, the benefit is that you will no longer be liable for any future operation and maintenance responsibilities associated with your current system. Also, any limitations you may experience with your current system won’t be a problem.
Will you need to close any roads?
Yes, to ensure the safety of the public and our workforce, multiple roads will need to be closed in the village. You can learn more about this by watching our webinar above.
Will there be access to properties and pedestrian/cycle access through the road closures?
Access to properties will be maintained throughout our work and there will be diversion routes clearly signposted. Our work will be fenced off to allow access through for pedestrians and cyclists.
Do you have any recommended contractors to do the connection and ground works?
You can find approved contractors by visiting this website: watersafe.org.uk/water_support_services
Will the vacuum pots smell?
The pots will be airtight, sealed chambers buried underground, so they should not emit any odour.
Can I put my surface water into the new sewerage system?
No, only foul water will be allowed to enter the new sewerage system. Before you connect you will be need to separate your surface and foul water, your contractor will be able to do this. Some people leave their current drainage systems in place and only use it for surface water drainage.